Industrial ceramics custom zirconia ceramic rods

Y2O3-ZrO2 Fully Stablized Ceramic RodMission Ceramic supply high quality zirconia rods. .  We have both PSZ (partially stabilized zirocnia) and FSZ (fully stabilized zirconia). 1.ZrO2 Ceramic Rod Technical DataPSZ Ceramic PropertiesPROPERTIESUnitZirconia CeramicAl2O3 (ZrO2 )Contentwt%≥ 94DensityG /CM36.00Hardne

Featured Products

Y2O3-ZrO2 Fully Stablized Ceramic Rod
Mission Ceramic supply high quality zirconia rods. .  
We have both PSZ (partially stabilized zirocnia) and FSZ (fully stabilized zirconia).
Industrial Ceramic Customized Zirconia Ceramic Rods
 
1.ZrO2 Ceramic Rod Technical Data
PSZ Ceramic Properties
PROPERTIESUnitZirconia Ceramic
Al2O3 (ZrO2 )Contentwt%≥ 94
DensityG /CM36.00
Hardness (HRA)HRA ≥90
Flexural  StrengthMPa ≥800
Max. use TemperatureºC1000
Gas-tightness Pass
Thermal shock Resistance Pass
Coeff. of Thermal exp.×10-6/ºC10.0
Volume ResistivityΩ·cm 20ºC1014
Dielectric StrengthKV/mm , DC≥20
Acid Resistancemg/cm2 ≤2.0
Alkali Resistancemg/cm2 ≤0.08
Wear  abilityg/cm2 ≤0.05
Compressive StrengthM Pa ≥2000
Tensile StrengthM Pa ≥600
Elastic Modulus(Young)G Pa320
Thermal ConductivityW/m·K( 20ºC)2.6
 
Y-FSZ Ceramic Properties
Chemical contentZrO286 wt%
Y2O314 wt%
 
Physical Properties
Melting point≥2500ºC
Max. operating temperature2200ºC
ColorWhite
Density5.8g/cm3
Mechanical propertiesFlexural strength200MPa
Young's module200GPa
Hardness(HRA)86
Thermal propertiesThermal expansion coefficient(20ºC)8-10X10-6
Thermal conductivity1-2W/mk
Electrical propertiesDielectric constant(1MHz25ºC)12
Electrical resistivity(25ºC)109
Industrial Ceramic Customized Zirconia Ceramic Rods
 
 
2.Advantage of Mission Zriconia Ceramic Rod
 1).We can provide Y2O3-ZrO2,CaO-ZrO2,MgO-ZrO2.
 2).High density ,about 6.0g/cm³.
 3).ISO pressing ,tight tolerance.
 4).Polished surface and good surface roughness.
 
About Our Company
Zhengzhou Mission Ceramic Products Co.,Ltd is located in Zhengzhou Advanced Al2O3 Wear Resistant Ceramic RodCity,Henan Province. We have been focused on high quality ceramic products for years. We are providing the following materials.
1.Alumina mainly 95% to 99.7% purity.
 
2.Zirconia,including FSZ and PSZ, Y2O2-ZrO2,CaO-ZrO2,MgO-ZrO2 available.
 
3.Silicon Carbide, including SiSIC,ReSiC,NSiC,SSiC.
 
4.Boron Nitride(BN)
 
5.Ceramic Fiber products,including board,blanket,and bulk fiber.
 
6.Heaters,mainly Molybdenum Disilicide(MoSi2) and Silicon Carbide(SiC) heaters.
 
For different ceramic part,we have different processing method,including Casting,Extruding,Tape Casting,Dry pressing and ISO pressing.
 
If you are interest in any of our products,please let us know.I believe you will like our products and service.
Zhengzhou Mission Ceramic Products Co., Ltd
No.11 Zhengshang Road, Zhengzhou, Henan, China
 
 
 
Industrial Ceramic Customized Zirconia Ceramic Rods


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours