Aluminum profile 3-axis heavy-duty CNC machining center

3 axis heavy duty aluminum cnc BT40 machine centerMain Features:1, CNC processing center BT40 is an integrated bed, using Q235A welding or epoxy resin sand casting process manufacturing bed frame, and after heat setting treatment to ensure long time precision and stability.2, the CNC machining center BT40 adopts the integrated d

Featured Products

3 axis heavy duty aluminum cnc BT40 machine center

Aluminum Profile 3 Axis Heavy Duty CNC Machining Center
Aluminum Profile 3 Axis Heavy Duty CNC Machining Center


Main Features:

1, CNC processing center BT40 is an integrated bed, using Q235A welding or epoxy resin sand casting process manufacturing bed frame, and after heat setting treatment to ensure long time precision and stability.

2, the CNC machining center BT40 adopts the integrated design of the total control cabinet and the body, which is convenient for transportation, installation 
and operation, and has higher stability.

3, the optional set of chain type chip system, easy to clean.

4, set multi-station processing, high efficiency.

5, equipment X, Y, Z axis positioning speed up to 60m/min, 30m/min, 30m/min.

6. The cable tank chain, the guide rail of each axis and the drive rack and the screw rod adopt the full protection structure, which effectively prevents the processing of the debris from entering and greatly improves the life of the transmission parts.

7, equipped with guide rail automatic lubricating system, convenient maintenance.

8. Themicrolubrication system of the cutting tool or the cooling system of the cutting liquid water cooling system can effectively protect the tool and improve the life of the cutter, and configure the oil-water separator (the cooling circulation system of the cutting liquid water) to effectively separate the lubricating oil in the cutting fluid and effectively improve the service life of the cutting fluid.

9, the main shaft adopts the original Taiwan number grid brand, the highest speed can reach 12000RPm, and its performance and life are much higher than that of similar products.

10, the knife magazine is equipped with the original brand of Taiwan first round, equipped with24 bit tool bit, and the speed of adjacent tool changing is 2 seconds.

11, with rigid tapping function, fast processing speed and high accuracy of tapping.

12, the servo spindle motor can output 35.8Nm at maximum speed, and the speed can reach 12000rpm, which is suitable for steel heavy load machining and copper and aluminum alloy material processing.

13. The original FANUC CNC system is simple in operation and high instability and practicality. At the same time, the system of tool life management is configured separately to facilitate the life management of the tool.

14, equipped with the oil-water separator to separate oil and water automatically.

15, equipped with a protective safety door to ensure the safety of the operator and prevent the splashing of waste liquid.

16, the system can reserve the manipulator interface to cooperate with the increase of manipulator.  


Parameter:
 STROKE
X(Stroke for X axis)4500mm~12500mm as option
Y(Stroke for Y axis)500/600mm
Z(Stroke for Z axis)500mm
 SPINDLE
(Spindle Speed)12000 RPM
(Spindle Taper)BT40
 TOOLS
(Capacity Of Tools Magazine)24
(Tool Change Time)2.0(2.0 sec)
 MOVING SPEED
X(X Axis Moving Speed)60m/min
Y(Y Axis Moving Speed)30m/min
Z(Z Axis Moving Speed)30m/min
X/Y/Z(X/Y/Z Feeding Speed)1-1500mm/min
 POWER OF MOTOR
(Spindle Driven Motor)7.5 kw
X/Y/Z(X/Y/Z Driven Motor)3.0 kw
 
 LUBRICATING SYSTEM
(Lubricating System) 
(Cooling System)/(Water Cooling System)
 PRECISION
X (Position Precision Of X Axis)±0.05 mm ()
Y/Z (Position Precision Of Y /Z Axis)±0.02 mm
(Repeating Position)±0.02 mm
 SIXE OF MACHINE
(Power Supply)AC  380V  50Hz
(Power)20KW
(Air Pressure)0.5MPa - 0.8MPa
(Height)2600 mm 
(Weight)5000 kg~22000KG
(Area)9300mm×2600mm×2700mm (4500mm)
  MAIN COMPONENT CONFIGURATION
(Operation System)FANUC 0I MF SYSTEM
(Serve Motor)FANUC β
(Spindle Motor)FANUC,7.5KW,12000 RPM
(Spindle)BT40,12000RPM
(Tools Magazine)(HAND WHEEL INDUSTRY)24TURRET
(Guide Rails)THK
(Bearings)NSK
(Ball Screw)TBI C5
(Electrical Parts)Schneider
(Pneumatic Components)AIRTAC
(Reducer)ATG

Parker Company:
Aluminum Profile 3 Axis Heavy Duty CNC Machining Center

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours